Installation Guide for AXOR Starck Handshower

Quick guide from the manual

This document provides installation and maintenance instructions for the AXOR Starck handshower series. For optimal results, Hansgrohe recommends that the unit be installed by a licensed, professional plumber. Before installation, ensure you have all necessary tools and supplies. The unit does not include a wall supply; it must be used with Hansgrohe model 27458XX3 or another approved supply that complies with ASME A112.18.1/CSA B125.1 standards.

Technical specifications

The flow rate varies by model:

• 04486XX0: 1.75 GPM (6.6 L/min)
• 04304XX0: 2.0 GPM (7.6 L/min)
• 10531XX1, 28532XX1: 2.5 GPM (9.5 L/min)

Important: This showerhead must be used with an automatically compensating valve. To prevent scald injury, the maximum output temperature of the shower valve must be no higher than 120°F (112°F in Massachusetts).

Installation

The installation process is straightforward:

1. Ensure the hose connection is clean and ready.
2. Screw the handshower onto the hose connection securely.

Cleaning and maintenance

To maintain the product and prevent damage, follow these guidelines:

• Regular Cleaning: Clean the product when mineral scale or soap residue builds up.
• Cleaning Agents: Use a cleaning agent specifically intended for the product type. Do not use cleaners containing hydrochloric acid, formic acid, lye, or acetic acid. Avoid abrasive powders, pads, brushes, steam cleaners, and "no-rinse" agents.
• Application: Do not spray cleaners directly onto the product. Spray the cleaner onto a soft cloth or sponge, then wipe the product.
• Rinsing: Always rinse thoroughly with clear water and polish dry with a soft cloth after cleaning.
• Storage: Do not store cleaning agents under the product (e.g., in a vanity unit), as fumes may cause damage.

Warranty

Hansgrohe, Inc. offers a limited warranty on AXOR branded products. The warranty covers defects in material and workmanship for the original consumer purchaser. Damage caused by improper care, use of improper cleaning agents, or incorrect installation is not covered. For warranty service, contact Hansgrohe, Inc. at 1492 Bluegrass Lakes Parkway, Alpharetta, GA 30004, or call 800-334-0455.