Baseus Wisdom Auto Alignment Car Mount Wireless Charger CGZX000001

Quick guide from the manual

This guide provides essential instructions for installing and operating the Baseus Wisdom Auto Alignment Car Mount Wireless Charger. Ensure you use a compatible power adapter and follow the installation steps carefully to avoid damaging your vehicle's air vent.

Product Introduction

• Indicator bar
• Left/Right clamp arm
• Type-C port
• Knob
• Tail clamp hook
• Tail clamp knob
• Clamp arm turn-on switch
• Wireless charging area

Product Installation

1. Turn the knob to extend the tail clamp hook.
2. Select an appropriate air outlet position. Hook the air outlet grating with the tail clamp hook and tighten the knob until the support does not sway. Do not overtighten to avoid damaging the air outlet.
3. Release the knob, press the ball head into the ball head groove, and adjust the support angle so the line of sight is vertical to the support surface. Tighten the knob to secure.
4. Connect the power cord to the Type-C port.
5. Place the mobile phone on the mount; the support will automatically clamp the phone.
6. Touch the switch to open the support and remove the mobile phone.

Light Indication

• Breathing: Charging in progress.
• Steadily on: Fully charged.
• Blinks fast: Abnormality detected (FOD alarm, overvoltage, undervoltage, or high temperature protection).

Important Tips

• Use a 5V/2A, 9V/2A, or 12V/1.67A adapter for optimal performance.
• Ensure there is no metal between the wireless charging area and the mobile phone.
• The operating environment temperature should be maintained between 0-25°C.
• The wireless charging coupling distance is 6mm; thick phone cases may affect charging efficiency.
• Reinforce the support immediately if it becomes loose after long-term operation.