Furniture / Beds Mattresses
Assembly and Care Guide for Bed Bath And Beyond 194S8349 Double Reclining Love Seat
Quick assembly guide and maintenance instructions for the 194S8349 Double Reclining Love Seat. Includes step-by-step setup, component list, and care tips for PU leather.
Table of contents
Manual images
Jump to the sectionQuick guide from the manual
This document provides assembly instructions for the 194S8349 Double Reclining Love Seat. The assembly process is straightforward and requires no power tools. Please follow the steps carefully to ensure the furniture is set up correctly and safely.
Component list
- A: Seat (1 pc)
- B: LSF (Left Side Facing) Back Rest (1 pc)
- C: RSF (Right Side Facing) Back Rest (1 pc)
Assembly
Step 1: Align the LSF Back Rest (B) and RSF Back Rest (C) with the metal brackets on the Seat (A). Slide the back rests down onto the brackets until they are securely locked in place.
Step 2: Ensure the back rests are fully engaged. Secure the bottom flaps of the back rests to the seat base using the provided Velcro strips to ensure a clean finish.
Operation
To recline the love seat, locate the manual pull mechanism on the side of the armrest. Pull the lever to activate the reclining function. The love seat also features integrated storage bags on the sides for convenience.
Care and maintenance
To maintain the appearance of your PU furniture, follow these guidelines:
- Avoid direct exposure to sunlight, heating, or air conditioning outlets, as these can fade or damage the PU material.
- Regularly vacuum or wipe the surface with a soft cloth to remove dust.
- Periodically check all hardware connections and re-tighten them if they have loosened over time.
- For use on wooden floors, hard surfaces, or carpets, it is recommended to install protective pads under all legs to prevent scratches and discoloration.
Important: Do not use power tools for assembly, as they increase the risk of over-tightening, which can lead to splitting or cracking the wood frame.
Practical help
Common problems
Back rest feels loose or unstable
Ensure the back rest brackets are fully engaged with the seat base. Check and re-tighten any hardware if necessary.
PU material fading or cracking
Avoid placing the furniture in direct sunlight or near heating/air conditioning vents.
Before use
- Verify all components (Seat, LSF Back Rest, RSF Back Rest) are present.
- Ensure you have a clear space for assembly.
- Do not use power tools to avoid damaging the wood frame.
- Install protective pads under legs if placing on hardwood or delicate flooring.
Specs in practice
- LSF Back Rest
- Left Side Facing back rest when looking at the front of the sofa.
- RSF Back Rest
- Right Side Facing back rest when looking at the front of the sofa.
Images and diagrams
- The assembly involves sliding the back rest metal brackets into the corresponding slots on the seat base.
- Velcro strips are used to secure the back fabric to the seat base after the back rests are attached.
Model compatibility
- Recommended for indoor use only.
- Suitable for placement on carpets, wood, or hard surfaces provided protective pads are used.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.