User Manual for Belkin UltraCharge 2-in-1 Foldable Magnetic Charger (WIZ039)

Important Information

This document provides safety, regulatory, and technical information for the Belkin UltraCharge 2-in-1 Foldable Magnetic Charger (Model: WIZ039). Please read these instructions carefully to ensure safe operation and to prevent damage to the device or property.

Safety Instructions

Failure to follow these instructions could result in fire, electric shock, injury, or damage to the user, product, or other property.

• Connect the power supply to a power outlet that is close by and easy to disconnect.
• Use indoors and in a dry location only. Avoid charging near sources of heat or humidity.
• Keep the wireless charger and power supply away from any liquids or moisture.
• Unplug the wireless charger when not in use for long periods of time.
• Do not store your device in very hot or very cold locations. It is recommended to use your device at room temperature.
• Do not use if visible defects are observed on the wireless charger or power supply.
• Do not attempt to service, modify, or disassemble the wireless charger or power supply.
• Use of a power supply not recommended or sold by Belkin may result in an increased risk of fire, electric shock, injury, or damage.

Usage Guidelines

The wireless charging power transmission rate is regulated by the device receiving power. Charging speed can be influenced by factors such as proprietary charging protocols, ambient temperature, current battery percentage level, and the age of the device being charged.

If you experience problems with the wireless charger, discontinue use, unplug the power supply from the socket, and contact Belkin for assistance.

Technical Specifications

The following specifications apply to the power supply unit:

• Input Voltage: 100-240V~
• Input AC Frequency: 50/60Hz
• Output Voltage: 5.0V, 9.0V, 12.0V, 20.0V (PDO), 5.0-16.0V (PPS)
• Output Current: 3.0A, 3.0A, 3.0A, 3.0A, 2.25A (PDO), 2.8A (PPS)
• Output Power: 15.0W, 27.0W, 36.0W, 45.0W

Regulatory Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Disposal and Recycling

The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste. Please dispose of this product at a specialized waste disposal center for electrical and electronic equipment or return it to the dealer when purchasing a new device.