Furniture / TV Stands
User Manual for Belleze Harper TV Fire Stand 014-HG-41893
Quick guide for assembling and maintaining your Belleze Harper TV Fire Stand (014-HG-41893). Includes assembly steps, weight limits, safety warnings, and care instructions.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides assembly and maintenance instructions for the Belleze Harper TV Fire Stand. The assembly process requires two people and takes approximately 100 minutes. Please ensure all parts are present before beginning assembly and keep the area clear of children and pets.
Assembly requirements
- Tools needed: Screwdriver, hammer, and drill (not included).
- Personnel: 2 people are required for assembly.
- Environment: Assemble on a carpet, rug, or empty carton to prevent scratches.
Safety warnings
- Weight limits: The top panel supports a maximum of 70 lbs (31.8 kg). Shelves support a maximum of 30 lbs.
- TV compatibility: Designed for flat panel TVs with a maximum width of 75 inches. Do not exceed the weight capacity.
- Anti-tipping: The furniture must be permanently fixed to the wall using the included anti-tipping device to prevent serious or fatal crushing injuries.
- Handling: Be careful when handling glass components to prevent injury.
Assembly steps
The assembly involves 27 steps, including attaching cam bolts, inserting wood dowels, and connecting panels. Key stages include:
- Frame assembly: Attaching medial panels, center panels, and crossbars to the bottom panel.
- Leg assembly: Assembling the leg frame and attaching it to the bottom panel.
- Back panels: Sliding back panels into place.
- Top panel: Attaching the top panel to the stand.
- Doors: Attaching hinges and handles to cabinet doors, then mounting them to the stand.
- Fireplace: Inserting the fireplace unit into the mantel opening and securing it.
- Finishing: Attaching anti-tipping straps and the wood strip on top.
Care and maintenance
- Tightening: Tighten all bolts and screws within the first 2 weeks of assembly. Check the tightness of all bolts every 2 months.
- Cleaning: Clean MDF surfaces with a lightly dampened cloth. A small amount of mild soap may be used if necessary. Dry immediately.
- Restrictions: Do not use bleach or alcohol. Do not apply wood treatment to MDF parts. Avoid water damage as MDF will swell and distort.
After-sale service
If you encounter difficulties or are missing parts, contact Belleze support at 1-800-682-6376 or email [email protected]. Replacements are available.
Manufacturer information
Belleze Furniture
Practical help
Common problems
Uneven cabinet door clearance
Adjust the hinges using the mounting plate screws for up/down adjustment, hinge arm screws for in/out adjustment, or the front adjustment screw for side-to-side alignment.
Missing parts or hardware
Do not use the product until missing parts are restored. Contact customer support for replacements.
Before use
- Ensure 2 people are available for assembly.
- Clear a workspace on a carpet or rug.
- Verify all parts (1-22) and hardware (A-V) against the package contents list.
- Have a screwdriver, hammer, and drill ready.
- Ensure the wall is suitable for installing the anti-tipping device.
Specs in practice
- Max TV Weight
- 70 lbs (31.8 kg). Exceeding this may cause instability.
- Max TV Width
- 75 inches.
- Assembly Time
- Approximately 100 minutes.
Images and diagrams
- The manual uses numbered parts (1-22) and lettered hardware (A-V) to guide assembly.
- Hinge adjustment diagrams show how to align cabinet doors.
Model compatibility
- Designed for flat panel TVs only.
- Requires wall anchoring to prevent tipping.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.