Lighting / Controllers & Dimmers
Installation and Specification Guide for Cooper 22FP Edge Lit Panel
A comprehensive guide for the Cooper 22FP 2' x 2' Edge Lit Panel. Includes technical specifications, mounting options, accessory details, and electrical requirements.
Quick answers from the manual
Quick answer
- The Cooper 22FP is a 2' x 2' edge-lit LED panel designed for recessed, suspended, or surface mounting. It supports 120-277V input, 0-10V dimming, and offers various lumen/wattage configurations. p. 1, 2
Key actions
- Mounting the fixture p. 1, 3
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Input Voltage | 120-277V | Universal voltage driver | p. 2 |
| Dimming | 0-10V | Standard dimming to 10% | p. 2 |
| IP Rating | IP5X | Dust protected | p. 2 |
Show 1 more answers Show less
Where to find it in the PDF
- Product Overview and Features p. 1
- Ordering Information and Performance p. 2
- Accessories and Photometric Data p. 3
Table of contents
Manual images
Click an image to enlargeQuick Guide from the Manual
The Cooper 22FP is a 2' x 2' edge-lit LED panel designed for versatile installation in commercial offices, schools, healthcare facilities, and retail spaces. It features a low-profile design (less than 2" height) suitable for shallow plenums and supports multiple mounting methods including recessed, suspended, and surface mounting. The unit operates on a universal 120-277V input and includes standard 0-10V dimming capabilities.
Product Overview
The 22FP series is engineered for high efficacy and uniform illumination. Key features include:
- Low Profile: Less than 2" height, ideal for shallow plenums and low ceiling spaces.
- Construction: Narrow aluminum bezel with a steel back plate and white frost lens for uniform light distribution.
- Dimming: Standard 0-10V dimming to 10%.
- Compatibility: Compatible with field-installed wireless controls (Wavelinx or Enlighted).
- Safety: IC rated for direct insulation contact and IP5X rated.
Mounting and Installation
The 22FP supports various installation configurations:
- Recessed: Standard installation for grid ceilings. Integral grid locking clips and separate suspension clips are provided for additional retention.
- Surface Mounting: Available using specific surface mount kits (FPXSURF22 or FPSURF22).
- Suspension: Supported via the FPSUS2 suspension kit, which includes a 2-point Y-hanger system with aircraft cable.
Note: The junction box is constructed of code-gauge galvanized steel with an easy-access hinged door and supports up to 12AWG wiring.
Electrical and Emergency Options
The luminaire operates on a 120-277V driver. Emergency battery pack options are available as factory-installed or field-installed units:
- Battery Packs: Available in 7W, 10W, or 14W configurations.
- Self-Diagnostic: Self-diagnostic emergency battery options are available in 10W or 14W (compliant with NFPA 101 Life Safety Code).
- Performance: Provides a minimum 90-minute backup period.
Accessories
Several accessories are available to customize the installation:
- Surface Mount Kit: FPXSURF22 (recommended) or FPSURF22.
- Drywall Frame Kit: DF-22W-U.
- Suspension Kit: FPSUS2 (includes aircraft cable, carabiner, ceiling connection, SO cord, and J-box cover plate).
Practical help
Common problems
Fixture height constraints
The luminaire is less than 2" high, making it ideal for shallow plenums.
Need for emergency backup
Factory or field-installed battery pack options (7W, 10W, 14W) are available for emergency operation.
Surface mounting requirement
Use the FPXSURF22 or FPSURF22 surface mount kit. Note that FPSURF14 cannot be used with EL7W or EL14W options.
Before use
- Verify the ceiling type (recessed, suspended, or surface).
- Confirm the required voltage (120-277V).
- Check if 0-10V dimming is required for your control system.
- Determine if an emergency battery backup is needed.
- Ensure the junction box is accessible for wiring.
Show more Show less
Specs in practice
- CRI (Color Rendering Index)
- Minimum 80 CRI standard; 90 CRI available for 3000K models.
Images and diagrams
- Dimensional drawings show a 23-3/4" x 23-3/4" footprint.
- Mounting details illustrate junction box access and suspension points.
Model compatibility
- Compatible with Wavelinx or Enlighted wireless controls.
- IC rated for direct insulation contact.
- Suitable for damp locations.
Manual page author
Emily Carter
User documentation editor