DigiTech Mosaic 12-String Effect Pedal Owner's Manual

Quick guide from the manual

The DigiTech Mosaic is a 12-string effect pedal designed to add a lush, shimmering chordal texture to both acoustic and electric instruments. It features a true bypass design to ensure your original tone remains unaffected when the effect is off. For optimal performance, the Mosaic should be placed first in your effects chain.

Device Overview

The pedal features two main controls:

• LEVEL: Blends the amount of the 12-string effect into your dry signal.
• TONE: Adjusts the high-frequency enhancement of the effect signal.

The footswitch toggles the effect on and off, indicated by an LED light.

Connections and Power

To connect the pedal to your rig:

1. Turn down your amplifier's master volume.
2. Connect your instrument to the Input Jack.
3. Connect the Output Jack to your amplifier or the next pedal in your chain.
4. Connect the provided power adapter to the Power Connector.
5. Gradually increase your amplifier's volume to the desired level.

Important: Use only the supplied power adapter and unbalanced TS instrument cables.

Example Settings

• Thickener: Set LEVEL and TONE to approximately 9 o'clock.
• Arpeggio (Electric Guitar): Set LEVEL and TONE to approximately 12 o'clock.
• Chords (Acoustic Guitar): Set LEVEL to 9 o'clock and TONE to 12 o'clock.

Technical Support

If you encounter issues, ensure you have followed the installation steps correctly. For further assistance, visit digitech.com or contact support at [email protected]. A Return Authorization Number is required for any factory service.