Automotive / Bicycle Carriers
Fiamma Carry-Bike Mercedes V Class Premium
Installation and usage guide for the Fiamma Carry-Bike Mercedes V Class Premium. Includes assembly steps, safety warnings, weight limits, and maintenance tips.
Table of contents
Quick guide from the manual
The Fiamma Carry-Bike Mercedes V Class Premium is designed for transporting bicycles on the rear of the vehicle. Before installation, ensure the vehicle is compatible and that the rear door or wall is sufficiently solid to support the carrier. The maximum load capacity is 60 kg, with a maximum of 4 bikes allowed. The maximum weight per bike is 15 kg. Always ensure the heaviest bike is placed closest to the vehicle for stability. Note that bike covers are not permitted on this model.
Package contents
The package includes various structural tubes, rails, and mounting hardware. Refer to the exploded view diagram on page 2 to identify all components (A through W) before beginning assembly. Ensure all parts are present and undamaged before starting.
Installation
Installation should be performed by qualified personnel. Follow the steps 1 through 18 carefully. A critical step is during the assembly of the fork to the tube (Step 5): do not fully tighten the fork to the tube; leave a 2 mm space. Ensure all screws are properly tightened to a maximum of 1.5 Nm as indicated in step 16. During installation, be careful not to close the rear door if the screws of the lower bar are not tightened, as this could damage the vehicle body.
Usage and safety
Always comply with speed limits and traffic regulations. When driving with the carrier, be aware of the increased length and weight of the vehicle. If rear visibility is limited, use additional rear-view mirrors. Always signal the presence of the carrier with a warning sign for protruding loads. When opening the tailgate, ensure the carrier structure or bike blocks do not interfere with the vehicle roof or opening systems. The tailgate can be opened with the carrier mounted, provided no bikes are loaded. It is recommended to rotate the handlebars of the bicycles to avoid damage to the vehicle wall.
Maintenance
Periodically check the bicycle rack to ensure it is firmly attached, especially after the first few kilometers and before/after long trips. Regularly inspect the rubber parts under the upper and lower brackets, as well as the straps. Replace any worn or porous components immediately.
Accessories
Various accessories are available for the Carry-Bike, including different rail types (Rail Premium, Rail Premium S, Rail Premium XL, Rail Premium S Fat Bike), Bike-Block Pro S, and a licence plate carrier for the lower version.
Manufacturer information
Fiamma SpA
Practical help
Common problems
Rear windscreen wiper interference
Check the brush radius before operating the windscreen wiper, as the presence of bicycles may obstruct it.
Tailgate cannot be opened
The tailgate can be opened with the carrier mounted, but only if no bikes are loaded.
Damage to vehicle wall
Rotate the handlebars of the bicycles to avoid contact with the vehicle wall.
Bike cover usage
Bike covers are not allowed on this specific Carry-Bike model.
Before use
- Check that all parts are undamaged and not deformed.
- Verify vehicle compatibility before installation.
- Ensure the rear door/wall is sufficiently solid for anchoring.
- Maintain a 2 mm gap when tightening the fork to the tube.
- Ensure the heaviest bike is placed closest to the vehicle wall.
- Check that all belts are secure and holding brackets have not shifted.
Specs in practice
- Max weight per bike
- 15 kg.
- Tightening torque
- Maximum 1.5 Nm for fasteners.
Model compatibility
- Designed for Mercedes V Class.
- Lower version requires a number plate holder with regulation lights.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.