Installation and Care Instructions for Falcon Ridge Aero-Vent Polycarbonate Windshield for 2019 Polaris RZR

Quick Guide from the Manual

This guide covers the installation of the Falcon Ridge Aero-Vent Polycarbonate Windshield for the 2019 Polaris RZR. Before beginning, verify all parts are present and inspect for damage. Important: Do not remove the protective film until you are certain the product fits correctly, as returns are not accepted once the film is removed.

Parts List

• Strap Clamps (4)
• 1 3/4" Hex Head Bolts (2)
• Nylon Spacers (4)
• Lock Nuts (2)
• Plastic Slide Fasteners (7)
• 46" Side Bulb Gasket (1)
• 1/2" wide Adhesive Padding (36" Long)
• Vent Slider (1)
• Windshield (1)

Installation Instructions

1. Preparation: Lay the windshield on a clean surface and peel off the protective film. Apply the 46" rubber gasket firmly across the bottom of the windshield, trimming any excess.
2. Vent Slider Assembly: Slide two nylon spacers over each hex head bolt. Insert the bolts into the vent slider holes and secure them with lock nuts until flush with the nut edge.
3. Slider Attachment: Place the slider on the inside surface of the windshield (the side with the gasket). Secure it using the plastic slide fasteners through the slots on the slider and into the windshield holes. Ensure lock nuts are positioned in the large slots.
4. Adhesive Padding: Apply the adhesive padding around the plastic piece on the RZR roll cage where the windshield will sit.
5. Windshield Mounting: Place the windshield on the vehicle. Insert the four Velcro clamps through the square holes, then wrap the straps around the roll cage and under the wire. Pull the strap back and attach it to the Velcro.

Cleaning and Maintenance

To clean the windshield, always use a liquid cleaner to minimize the risk of scratches. We recommend using a soft, clean rag or a micro-fiber cloth. Any standard window cleaner is suitable.

Return Policy and Warranty

Returns must be made within 30 days of receipt. The product must be in its original, unused, factory-new condition with the protective film intact. A 25% restocking fee applies to returns. Contact Falcon Ridge at 606-845-7439 for a return authorization number. The product includes a 30-day and 1-year manufacturer's warranty covering defects in material or workmanship.