Automotive / Utility Vehicle Accessories
Installation and Care Guide for Falcon Ridge Kawasaki 16Teryx 4 Top Cap Canopy
Comprehensive installation and maintenance guide for the Falcon Ridge Kawasaki 16Teryx 4 Top Cap Canopy. Includes step-by-step mounting instructions, cleaning tips, storage advice, and warranty details.
Quick answers from the manual
Quick answer
- This guide covers the installation and maintenance of the Falcon Ridge Top Cap Canopy for the Kawasaki 16Teryx 4. Key requirements include installing in temperatures above 70°F and rolling the cab for storage instead of folding. p. 1, 2
Key actions
- Install adhesive hook strips on the roll cage 6-10 inches from the top. p. 1
- Roll the cab for storage to prevent window damage. p. 2
First start
- Ensure the installation environment is 70°F or warmer. p. 1
Maintenance and reset
- Clean with mild detergent and warm water; never use a dry cloth. p. 2
Where to find it in the PDF
- Installation Instructions p. 1, 2
- Return Policy p. 3
- Warranty p. 4
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
For the best installation results, ensure the ambient temperature is 70°F (21°C) or warmer. This temperature is crucial for the adhesive Velcro to bond correctly. If you must install in colder weather, store the adhesive strips at room temperature prior to installation. Always clean the roll cage surface thoroughly before applying any adhesive components.
Installation
- Preparation: Open the carton and remove the Top Cap on a large, clean, flat surface.
- Parts Check: Verify you have: 7 Adhesive Hook strips (6" long), 4 Webbing straps with Velcro, 2 Webbing straps with Grommet, and 1 Top Cap.
- Mounting: Place the Top Cap over the roll cage. Wrap the roll cage bar with adhesive hook strips roughly 6-10 inches from the top.
- Securing: Wrap the double-sided Velcro sewn to the ends of the webbing straps around the adhesive hook strips so the strap points upward.
- Lacing: Lace the straps through the buckles sewn to the corners of the Top Cap.
- Snapping: Wrap the roll cage with the Double-Sided Velcro strip with snap around the middle bar to align with the snap on the Top Cap. Snap the two together.
Cleaning and Storage
Proper care extends the life of your cab enclosure.
- Cleaning: Clean with a soft rag or sponge using a mild liquid detergent soap and warm water solution. Never rub the windows with a dry cloth or rag, as this will cause scratching.
- Storage: Always roll the cab for storage; never fold it, as folding will damage the windows. Roll the cab into a roll approximately 8 inches in diameter. Store at normal room temperature and avoid extreme hot or cold conditions.
Warranty and Returns
Falcon Ridge offers a 30-day return policy and a 1-year manufacturer's warranty covering defects in material or workmanship. Returns must be in unused, factory-new condition with the original packaging. For returns or warranty claims, contact Falcon Ridge at 606-845-7439 or visit www.overarmouroffroad.com.
Official resources from the manual
Practical help
Common problems
Windows scratching during cleaning
Clean only with a soft rag or sponge, mild detergent, and warm water. Never use a dry cloth.
Damage to windows during storage
Always roll the cab for storage. Never fold it, as folding causes permanent damage to the vinyl.
Adhesive Velcro not sticking
Ensure installation temperature is 70°F or warmer. If cold, store adhesive strips at room temperature before applying.
Before use
- Verify ambient temperature is 70°F or warmer.
- Clean the roll cage surface to be free of dirt.
- Check parts: 7 Adhesive Hook strips, 4 Webbing straps with Velcro, 2 Webbing straps with Grommet, 1 Top Cap.
- Prepare a large, clean, flat surface for installation.
Specs in practice
- Adhesive Hook strips
- 6 inches long; used for securing straps to the roll cage.
- Storage roll diameter
- Approximately 8 inches; the recommended size for rolling the cab.
Images and diagrams
- The strap diagram shows how to lace the webbing straps through the buckles sewn to the corners of the Top Cap.
- The snap photos demonstrate how to align and secure the Double-Sided Velcro strip with the snap on the Top Cap.
Model compatibility
- Designed specifically for the Kawasaki 16Teryx 4.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.