findmanualpdf.com

Installation and Care Guide for Falcon Ridge Arctic Cat Wildcat Trail & Sport Soft Rear Window

Learn how to install and maintain your Falcon Ridge Soft Rear Window for Arctic Cat Wildcat Trail & Sport. This guide covers step-by-step mounting instructions, cleaning tips, storage recommendations, and warranty information.

Table of contents

Manual images

Click an image to enlarge

Quick guide from the manual

The Falcon Ridge Soft Rear Window is designed for Arctic Cat and Textron Wildcat Trail and Sport models. For the best installation results, perform the setup in temperatures of 70°F or warmer, as this ensures the adhesive Velcro bonds correctly. If you must install in colder conditions, store the adhesive strips at room temperature before starting. Important safety notice: Do not smoke inside the cab or expose the enclosure to direct flames, as the material is flammable.

Installation instructions

Before beginning, ensure you are working on a large, clean, and flat surface. Verify that you have all the necessary parts included in the carton: 3-inch, 18-inch, and 44-inch adhesive Velcro hook strips. If any parts are missing or damaged, contact customer service at 606-845-7439.

Top attachment using double-sided Velcro and 3-inch adhesive hook
Top attachment using double-sided Velcro and 3-inch adhesive hook
Detailed view of Velcro attachment to the roll cage
Detailed view of Velcro attachment to the roll cage

Steps to install:

  1. Clean the roll cage surface thoroughly to ensure proper adhesion.
  2. Attach the top of the rear window using the double-sided strips. At each strip location, apply a 3-inch adhesive hook piece on the inside of the roll cage.
  3. Apply the 18-inch adhesive strips down the sides of the roll cage, facing the rear of the vehicle, and attach the sides of the rear window to these strips.
  4. Secure the bottom of the window to the vehicle using the 42-inch adhesive Velcro strip.

Cleaning and storage recommendations

Proper maintenance will extend the life of your cab enclosure. Before removing the cab for storage, clean it thoroughly to prevent scratching the window panels. Use a soft rag or sponge with a mild liquid detergent soap and warm water. Never rub the windows with a dry cloth or rag.

When storing the enclosure, it is critical to roll it rather than fold it, as folding will cause permanent damage to the vinyl windows. Roll the cab into a roll approximately 8 inches in diameter, similar to how it was packed at the factory. Store the rolled cab in the carton at normal room temperature, avoiding extreme heat or cold.

Warranty and return policy

Falcon Ridge offers a 30-day warranty covering defects in the product, including the enclosure, tops, and windshields. A 1-year warranty is also provided for defects in material or workmanship. If you need to return the product, it must be returned within 30 days of receipt in its original, unused, factory-new condition. All returns must be packaged exactly as they were originally received to qualify for a full refund. Contact Falcon Ridge at 606-845-7439 to obtain a return authorization number before shipping.

Practical help

Common problems

Adhesive Velcro not sticking

Ensure installation occurs in temperatures of 70°F or warmer. If it is cold, store the adhesive Velcro at room temperature before attempting installation.

Windows scratched during cleaning

Always use a soft rag or sponge with mild detergent and warm water. Never use a dry cloth or rag to wipe the windows.

Windows damaged during storage

Do not fold the cab. Always roll the cab into an 8-inch diameter roll to prevent creasing and damage to the vinyl.

Before use

  • Ensure ambient temperature is 70°F or warmer
  • Clean the roll cage surface to remove dirt
  • Verify all Velcro strips are present (3", 18", 44")
  • Have a soft rag and mild detergent ready
  • Clear a large, flat surface for installation

Specs in practice

3" Adhesive Hook
Used for securing the top of the rear window to the roll cage.
18" Adhesive Strips
Used for securing the sides of the rear window to the roll cage.
42" Adhesive Strip
Used for securing the bottom of the rear window to the vehicle.

Images and diagrams

  • The diagrams show the correct application of double-sided Velcro and 3-inch adhesive hook pieces to the roll cage to secure the enclosure.

Model compatibility

  • Compatible with Arctic Cat / Textron Wildcat Trail and Sport models.

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.