Power / Batteries & Chargers
Hama 00210506 Lightning Charger User Guide
Quick guide for the Hama 00210506 Lightning Charger. Includes safety instructions, technical specifications, and usage guidelines for safe operation.
Quick answers from the manual
Quick answer
- The Hama 00210506 is a Lightning charger for indoor use. It operates on 100-240V AC and provides a 5V DC output at 2.4A (12W). p. 1
Key actions
- Disconnect the device from the power supply before cleaning or if it will not be used for a long period. p. 2
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Input Voltage | 100-240V | Operating voltage range | p. 1 |
| Output | 5.0V DC / 2.4A / 12.0W | Charging output specifications | p. 1 |
Where to find it in the PDF
- Technical Specifications p. 1
- Safety Instructions p. 2
Table of contents
Important information
This document provides essential safety and technical information for the Hama 00210506 Lightning Charger. Always ensure the device is used in a dry, indoor environment and within the specified power limits.
Safety instructions
- Indoor use only: The product is designed for use inside buildings in moderate climatic conditions.
- Heat sources: Do not use the product in the immediate vicinity of heaters, other heat sources, or in direct sunlight.
- Damage: Do not continue to operate the device if it becomes visibly damaged. Do not bend or crush the cable.
- Children: Keep this product out of the reach of children.
- Repairs: Do not attempt to service or repair the product yourself. Leave all service work to qualified experts.
- Disconnection: Always pull directly on the plug when disconnecting the cable, never on the cable itself. Disconnect the device from the power supply before cleaning or if it will not be used for a long period.
Technical specifications
The charger is compliant with Regulation (EU) 2019/1782. Key specifications include:
- Input voltage: 100 – 240 V
- Input AC frequency: 50 – 60 Hz
- Output voltage / current / power: 5.0 V DC / 2.4 A / 12.0 W
- Average active efficiency: 79.9%
- Efficiency at low load (10%): 75.1%
- No-load power consumption: 0.08 W
Usage and maintenance
Connect the product only to a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible. Do not modify the product in any way, as doing so voids the warranty.
Manufacturer information
Hama GmbH & Co KG
Practical help
Common problems
Device not charging
Ensure the charger is plugged into a powered, approved socket and that the cable is securely connected to both the charger and your device.
Visible cable damage
Do not use the charger if the cable is bent, crushed, or shows signs of wear. Discontinue use immediately.
Before use
- Verify the power source is within the 100-240V range.
- Ensure the wall socket is easily accessible.
- Check the cable and housing for any visible damage.
- Ensure the environment is dry and not exposed to direct heat.
Specs in practice
- Output (5.0V / 2.4A)
- Provides 12W of power, suitable for charging compatible devices.
- Input (100-240V)
- Allows the charger to be used in most countries with standard AC outlets.
Model compatibility
- Designed for indoor use only.
- Not suitable for high-humidity environments.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.