General / Other Manuals
Hansgrohe Silicone Spray (97864000) Maintenance Instructions
Official maintenance guide for using Hansgrohe silicone spray to restore smooth operation of pull-out kitchen or bathroom faucets.
Table of contents
Product Overview
The Hansgrohe Silicone Spray (part number 97864000) is a specialized maintenance product designed to restore the smooth operation of pull-out faucet hoses. Over time, the mechanism that allows the spray head to be pulled out and retracted can become stiff or difficult to operate due to mineral deposits or friction. This spray is formulated to lubricate and maintain the components, ensuring the pull-out function remains easy to use.
When to Use
This maintenance procedure should be performed whenever you notice that the pull-out spray head has become difficult to extract or retract. Regular maintenance helps prevent mechanical strain on the hose and the docking mechanism.
Maintenance Procedure
The process involves cleaning and lubricating the pull-out mechanism to ensure smooth movement:
- Preparation: Ensure the area around the faucet is dry and clean.
- Application: Apply the silicone spray to the relevant parts of the pull-out mechanism as indicated in the product diagram.
- Operation: After application, cycle the pull-out hose in and out several times to distribute the lubricant evenly across the sliding surfaces.
- Repetition: If the movement remains stiff after the initial application, repeat the cleaning and lubrication process.
Safety and Contact
Always follow the safety instructions provided on the product label. Avoid contact with eyes. For further assistance or inquiries, you can contact Hansgrohe at:
Hansgrohe, Auestraße 5-9, D-77761 SchiltachPhone: +49 (0) 78 36/51-1282Fax: +49 (0) 7836/511440Email: [email protected]: www.hansgrohe.com
Official resources from the manual
Manufacturer information
Hansgrohe SE
Practical help
Common problems
Pull-out spray head is difficult to extract or retract.
Clean the mechanism and apply the Hansgrohe silicone spray, then cycle the hose in and out to distribute the lubricant.
Before use
- Ensure the faucet is in the closed position.
- Clean the visible parts of the pull-out hose and docking area.
- Verify that the hose is not physically kinked or obstructed under the sink.
Images and diagrams
- Step 1: Locate the pull-out hose mechanism.
- Step 2: Apply the silicone spray to the sliding components.
- Step 3: Retract and extend the hose to ensure smooth operation.
Model compatibility
- Designed for use with Hansgrohe pull-out kitchen and bathroom faucets.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.