Electronics / Networking
User Manual for Intellinet 561648 v2 PoE Extender
Quick installation guide for the Intellinet 561648 v2 2-Port Outdoor Vandalproof Gigabit Ultra PoE Extender. Includes connection steps, placement instructions, and safety guidelines.
Quick answers from the manual
Quick answer
- The Intellinet 561648 v2 is a 2-Port Outdoor Vandalproof Gigabit Ultra PoE Extender. It extends power and data transmission up to 100m using Cat5e/6 cables. p. 1
Key actions
- Connect PSE to PoE In port p. 1, 2
- Connect device to PoE Out port p. 1, 2
Maintenance and reset
- Unplug all cables before cleaning. Use a dry cloth. Do not immerse or spray liquids. p. 2
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Max Cable Length | 100 m | Maximum length for Cat5e/6 cables per connection. | p. 1, 2 |
Where to find it in the PDF
- Installation and Safety p. 1, 2
Table of contents
Quick guide from the manual
The Intellinet 561648 v2 is an outdoor PoE extender designed to transmit power and data over Ethernet cables. Setup involves connecting your Power Sourcing Equipment (PSE) to the PoE In port and your target device to the PoE Out port.
Connections
- PoE In: Connect a Cat5e/6 Ethernet cable (up to 100 m) from your PoE injector or switch to this port.
- PoE Out: Connect a second or third Cat5e/6 Ethernet cable (up to 100 m) from this port to the device you wish to power (e.g., a PoE network camera).
Placement
The base of the housing features mounting holes, allowing you to screw the extender onto a surface for a secure installation and to maintain cable connections.
Safety Instructions
General Safety: This device is intended for non-critical applications. Keep away from children; it is not a toy.
Electrical Safety: Use only the original or approved power adapter. Keep the device away from liquids, moisture, direct sunlight, and heat sources. Do not insert foreign objects into ports.
Handling and Maintenance: Unplug all cables before cleaning. Use a dry cloth; do not immerse or spray liquids. Do not attempt to open or repair the product, as unauthorized repairs void the warranty.
Manufacturer information
Intellinet Network Solutions
Practical help
Common problems
Device not powering
Verify the PoE source (PSE) is active and the Ethernet cable length does not exceed 100 meters.
Interference or signal loss
Ensure cables are properly connected and the device is not installed in an area with high electromagnetic interference.
Before use
- Verify the PoE source (PSE) is compatible with the device.
- Ensure Cat5e/6 Ethernet cables are available and under 100m in length.
- Check the device for any physical damage before installation.
- Identify a suitable mounting surface for the extender.
Images and diagrams
- The device features a PoE In port for the power source and PoE Out ports for connected devices.
- Mounting holes are located on the base for secure installation.
Model compatibility
- Compatible with standard PoE injectors or switches (PSE).
- Supports Cat5e/6 cabling up to 100m.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.