Lighting / Outdoor Lighting
Installation Manual for Lindby 1LICHT Outdoor Wall Lamp
Official installation and safety guide for the Lindby 1LICHT outdoor wall lamp. This manual covers essential safety precautions, mounting requirements, maintenance procedures, and disposal information.
Quick answers from the manual
Quick answer
- This document provides safety and installation instructions for the Lindby 1LICHT outdoor wall lamp. It requires professional electrical installation and adherence to specific safety distances and surface requirements. p. 1
Key actions
- Disconnect power before installation or maintenance. p. 1
- Ensure installation is performed by a qualified electrician. p. 1
Problems and fixes
Damaged cable, glass, or electrical parts
Do not use the product and contact the service address.
p. 1Maintenance and reset
- Clean with a dry or slightly moistened cloth; do not use chemicals or abrasive cleaners. p. 1
Where to find it in the PDF
- Safety and Installation Instructions p. 1
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides essential safety and installation instructions for the Lindby 1LICHT outdoor wall lamp. The most critical requirements are that the installation must be performed by a qualified electrician, the power must be disconnected during installation and maintenance, and the lamp must not be covered with thermal insulation materials.
Safety precautions
- Professional installation: The electrical connection must be performed by a trained electrician.
- Power supply: Never work on the light while it is connected to the power supply.
- Small parts: The product and packaging contain small parts that can be swallowed by children. Keep away from children.
- Damaged parts: If the cable, glass, or electrical parts are damaged, do not use the product and contact the service address.
Installation requirements
- Minimum distance: Maintain a minimum distance of 0.5 meters to illuminated surfaces.
- Surface suitability: The light is not suitable for direct installation on normally flammable surfaces.
- Insulation: The light is not suitable for covering with thermal insulation materials.
Cleaning and maintenance
Before performing any cleaning or maintenance, ensure the light is cooled down and disconnected from the power supply.
- Use a dry or slightly moistened cloth for regular cleaning.
- Never use chemicals or abrasive cleaning agents.
Disposal
This product should not be disposed of in normal household waste. It must be handed in to a collection point for the recycling of electrical and electronic equipment (WEEE). Used batteries must be handed in to the public collection points in your municipality or wherever batteries are sold.
Contact information
For further assistance or to request the full declaration of conformity, contact the manufacturer:
LUQOM Holding GmbHSeelbüde 13, D-36110 SchlitzEmail: [email protected]
Practical help
Common problems
Light does not work
Check the power supply and electrical connections. Ensure the installation was performed by a qualified electrician.
Damaged components
If the cable, glass, or electrical parts are damaged, do not use the product. Contact the service address provided in the manual.
Before use
- Unpack the product carefully and check that it is complete and intact.
- Ensure the power supply is disconnected before starting installation.
- Verify that the installation surface is non-combustible.
- Confirm that the installation location allows for a minimum distance of 0.5m to illuminated surfaces.
Model compatibility
- Not suitable for covering with thermal insulation materials.
- Not suitable for direct installation on normally flammable surfaces.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.