Computers / Keyboards Input
User Manual for Meetion MiniGo BT Wireless Mouse
Quick guide for the Meetion MiniGo BT Wireless Mouse. Learn how to connect via Bluetooth or 2.4G, charge the device, and check technical specifications.
Quick answers from the manual
Quick answer
- The Meetion MiniGo BT is a dual-mode wireless mouse. To connect via Bluetooth, switch to BT mode and hold the scroll wheel for 3 seconds until the blue LED flashes. For 2.4G, switch to 2.4G mode, hold the scroll wheel for 3 seconds until the green LED flashes, and insert the USB receiver. p. 2
Key actions
- Connect via Bluetooth p. 2
- Connect via 2.4G p. 2
First start
- Charge the device p. 3
Problems and fixes
Mouse not working
Restart power, disconnect and reconnect from PC, or check connect pins for damage.
p. 1Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Resolution | 1200dpi | Sensor sensitivity | p. 3 |
| Wireless distance | 10m | Operating range | p. 3 |
Where to find it in the PDF
- Installation and Features p. 1
- Product Introduction and Connection p. 2
- Specs and Warranty p. 3
Table of contents
Quick guide from the manual
The Meetion MiniGo BT Wireless Mouse is a dual-mode device supporting both Bluetooth and 2.4G wireless connections. To connect, use the switch at the bottom to select the mode and hold the scroll wheel for 3 seconds to enter pairing mode. The mouse is rechargeable via a Type-C interface.
Product Introduction
The mouse features three main buttons:
- Left button
- Right button
- Wheel & button
Connection Methods
Bluetooth wireless connection
- Dial the switch at the bottom to Bluetooth mode.
- Press and hold the scroll wheel for 3 seconds.
- The blue LED status light at the bottom will flash.
- Turn on the Bluetooth switch on your computer and search for the device named "Meeting MS BT5.0".
- Click to connect.
2.4G wireless connection
- Dial the switch at the bottom to 2.4G mode.
- Press and hold the scroll wheel for 3 seconds.
- The green LED status light at the bottom will flash.
- Plug the USB nano receiver into the computer's USB port.
Charging
The mouse uses a Type-C charging interface. A full charge takes approximately 2 hours. During the charging process, the indicator at the wheel is red; the indicator turns off when the battery is fully charged.
Technical Specifications
- Operation Mode: Opto-electronic
- Connection Type: 2.4GHz Wireless / Bluetooth
- Wireless Distance: 10m
- Resolution: 1200 DPI
- Key Life: 5 million times
- Weight: 37±2g
- Dimensions: 70 x 48 x 32mm
Compatibility
The mouse is compatible with Windows XP, Vista, 7, 8, Server 2003/2000, Win 10, and MacOS 10.10 or higher.
Troubleshooting
If the mouse is not working, please restart the power, disconnect and reconnect the USB receiver, or check the connection pins for possible damage.
Practical help
Common problems
Mouse not working
Restart the power, disconnect and reconnect the USB receiver, or check the connection pins for damage.
Before use
- Charge the mouse for approximately 2 hours before first use.
- Ensure the mouse is switched to the correct mode (Bluetooth or 2.4G) at the bottom.
- For 2.4G mode, ensure the USB receiver is plugged into an available USB port.
- For Bluetooth mode, ensure your computer's Bluetooth is enabled and searching for 'Meeting MS BT5.0'.
- Verify your operating system is compatible (Windows XP/Vista/7/8/10/Server or MacOS 10.10+).
Images and diagrams
- The bottom switch allows toggling between Bluetooth and 2.4G modes.
- The scroll wheel acts as a button and is used to initiate pairing mode by holding it for 3 seconds.
Model compatibility
- Compatible with Windows XP, Vista, 7, 8, 10, Server 2003/2000.
- Compatible with MacOS 10.10 and above.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.