Tools / Air Compressors & Pneumatics
User Manual for NEO TOOLS 200W Double LED Floodlight 99-096
Comprehensive user guide for the NEO TOOLS 200W Double LED Floodlight (model 99-096). Includes assembly instructions, safety guidelines, technical specifications, and operating procedures.
Quick answers from the manual
Quick answer
- The NEO TOOLS 99-096 is a double LED floodlight on a tripod stand, designed for outdoor use with a total power of 200W (2x100W). p. 3
Key actions
- Assemble the tripod and attach the lamps. p. 3
First start
- Spread the tripod legs, lock them, adjust height, attach the crossbar and lamps, then connect to power. p. 3
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Power | 2x100W | Total power consumption | p. 3 |
| IP Rating | IP65 | Waterproof class | p. 3 |
Where to find it in the PDF
- Assembly and Operation p. 3
- Technical Data p. 3
Table of contents
Manual images
Click an image to enlargeImportant Information
This manual provides instructions for the NEO TOOLS 99-096 double LED floodlight. Ensure you read all safety instructions before installation and use. The device is designed for outdoor use and features a tripod stand for adjustable height and positioning.
Safety Regulations
- Ensure electricity is switched off before installation.
- Do not use if the cord is cut or damaged.
- Maintain a distance of at least 1 meter from other objects.
- Do not mount directly on flammable surfaces.
- Operating temperature range: -25°C to 50°C.
- If the safety shield is damaged, it must be immediately replaced with tempered glass.
- Do not open or dismantle the device yourself.
Assembly and Installation
- Spread the tripod legs to the maximum position.
- Lock the legs using the locking knob.
- Unscrew the locks to slide the tubes to the desired height, then tighten to secure.
- Attach the horizontal bar to the stand using the screw.
- Attach the lamp frames to the horizontal bar using screws.
- Adjust the floodlight angle by loosening the side screws on the bracket, then re-tighten.
- Connect the lamp to the power source.
Technical Specifications
- Power: 2 x 100W
- Luminous flux: 2 x 8500 lm
- Voltage: 230V AC 50Hz
- IP Rating: IP65
- Weight: 5.4 kg
- Color Temperature: 6500K
Maintenance and Disposal
The device does not require specific maintenance other than keeping it clean and checking for damage. Do not dispose of electrically powered products with household waste; they should be utilized in proper recycling plants.
Practical help
Common problems
Device does not turn on
Check the power supply and ensure the plug is securely connected to a 230V AC outlet.
Overheating
Ensure the device is at least 1 meter away from other objects and not mounted on flammable surfaces.
Before use
- Check if the power cord is undamaged.
- Ensure the safety shield is intact.
- Verify mains voltage matches the device rating (230V).
- Check that the ambient temperature is between -25°C and 50°C.
Specs in practice
- Luminous flux
- 2 x 8500 lm total brightness.
Images and diagrams
- Figure B shows the assembly components: 1. Lamp, 2. Lamp frame, 3. Locking nuts, 4. Tripod, 5. Lamp locking screw.
Model compatibility
- Designed for outdoor use.
- Not for use on flammable surfaces.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.