User Manual for Sencor SBL 150WH / SBL 151BK Portable Vacuum Blender

Quick Guide

This portable blender is designed for making smoothies, protein drinks, and baby food. It features a vacuum function to reduce oxidation and preserve vitamins. Important: Do not wash the lid or container in a dishwasher. Do not use for hot liquids, ice, or hard ingredients like nuts.

Product Description

The blender consists of the following main parts:

• A1: Lid with control panel and blade unit
• A2: Carrying loop
• A3: Container (330 ml capacity)
• A4: Charging port
• A5: Vacuum mode button
• A9: Blending mode button
• A12: USB charging cable

Charging the Battery

The blender has a built-in Li-Ion battery. Before first use, charge it for approximately 2 hours.

1. Ensure the charging port A4 is clean and dry.
2. Connect the magnetic charging cable A12 to the port A4.
3. The LED A8 will be red during charging and turn white when fully charged.
4. Disconnect the cable once charging is complete.

Using the Blender

Vacuum Mode

1. Place ingredients in container A3 and add liquid. Do not exceed the MAX mark.
2. Ensure the sealing ring A11 is in place and close the lid A1 securely, aligning the symbols.
3. Press button A5 twice to start the vacuum process. The LED A6 will light up.
4. The process stops automatically after 21 seconds.

Blending Mode

1. Press button A9 twice to start blending. The LED A8 will light up white.
2. Turn the blender upside down and gently tilt it to ensure ingredients are processed.
3. The blending cycle lasts 30 seconds and stops automatically.
4. To release vacuum pressure before opening, press and hold button A7 for 3-5 seconds.

Cleaning and Maintenance

Warning: The lid A1 and container A3 are not dishwasher safe. Do not submerge the lid in water.

• Wash the underside of the lid A1 (with blade unit A10) and container A3 with warm water and detergent.
• Rinse thoroughly.
• Wipe the top of the lid with a damp cloth.
• Ensure the charging port A4 is dry after cleaning.
• Use a soft toothbrush to clean the sealing ring A11 if necessary.

Troubleshooting

• Vacuum won't start (LED A6 flashes white 3x): Lid A1 is not properly fixed to container A3. Ensure alignment.
• Blender won't start (LED A8 flashes white 3x): Lid A1 is not properly fixed.
• Blender won't start (LED A8 flashes red 3x): Battery is discharged. Recharge the device.

Technical Specifications

• Battery: Li-Ion, 7.4 V, 700 mAh
• Charging: 5 V, 1 A
• Blending Cycle: 30 seconds
• Noise Level: 85 dB(A)
• Protection Level: IP54