findmanualpdf.com

Tecnolite 12FTLLED013MV30N Outdoor LED Light Fixture Installation Guide

Quick installation guide and safety instructions for the Tecnolite 12FTLLED013MV30N outdoor LED light fixture. Learn how to mount, connect, and maintain your lighting safely.

Table of contents

Manual images

Click an image to enlarge
Step 1: Mounting the base Page 1 Step 2: Electrical wiring Page 1 Step 3: Grounding and securing Page 1 Step 4: Final assembly Page 1

Important Information

This document provides installation and safety instructions for the Tecnolite 12FTLLED013MV30N outdoor LED light fixture. Before installation, ensure the power supply is disconnected. The fixture must be installed at a minimum distance of 0.50 meters from any combustible material to prevent fire hazards.

Installation

Step 1: Mounting the base
Step 1: Mounting the base
Step 2: Electrical wiring
Step 2: Electrical wiring
Step 3: Grounding and securing
Step 3: Grounding and securing
Step 4: Final assembly
Step 4: Final assembly
  1. Mounting: Secure the base of the luminaire to the desired surface using the provided hardware.
  2. Wiring: Connect the electrical wires according to the electrical diagram provided in the manual. Ensure the ground connection is physical and secure.
  3. Securing: Ensure all connections are tight and the fixture is properly attached to the mounting surface.
  4. Final Assembly: Complete the assembly of the luminaire components as shown in the diagram.

Safety Warnings

  • Always disconnect the power supply before performing any installation or maintenance work.
  • The luminaire and its parts may become hot during operation; use gloves if necessary to avoid burns.
  • Ensure the ground connection is properly established.
  • Do not install the fixture in areas where it may come into contact with combustible materials.

Maintenance

To maintain the luminaire, disconnect the power supply and clean the fixture and its internal parts with a dry cloth. Periodically check all connections to ensure they remain secure.

Technical Specifications

  • Model: 12FTLLED013MV30N
  • Voltage: 100-240V ~ 50/60Hz
  • Power: 12W
  • Protection Rating: IP54 (Dust and splash-proof), IK07 (Impact protection)
  • Lamp Type: LED

Parts List

  • A-01 Screw
  • A-02 Anchor
  • A-03 Washer
  • A-04 Quick connector
  • A-05 Insulating tube
  • A-06 Allen wrench

Manufacturer information

Tecnolite

Brand profile
Manufacturer website https://www.tecnolite.mx Support https://www.tecnolite.mx/contacto Manufacturer manuals https://www.tecnolite.mx/catalogos-y-folletos

Practical help

Common problems

Light does not turn on

Verify that the power supply is connected and that the electrical wiring is secure according to the diagram.

Risk of fire

Ensure the fixture is installed at least 0.50 meters away from any combustible materials.

Before use

  • Verify that the local power supply matches the 100-240V requirement.
  • Ensure the power is completely disconnected before starting installation.
  • Check that the mounting surface is stable and suitable for the fixture.
  • Confirm all parts (screws, anchors, connectors) are present according to the parts list.
  • Ensure you have the necessary tools, including an Allen wrench.

Images and diagrams

  • Step 1: Shows the mounting of the base to the wall.
  • Step 2: Illustrates the electrical wiring connection.
  • Step 3: Details the grounding requirement and final tightening.
  • Step 4: Shows the final assembly of the fixture housing.

Related manuals

Related manuals from the same brand or category.

Manual page author

David Miller

Documentation analyst

Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.