Tecnolite 10LQLEDY30MVN Outdoor LED Floodlight

Quick guide from the manual

This document provides essential installation and safety instructions for the Tecnolite outdoor LED floodlight. Key requirements include maintaining a minimum distance of 0.5 meters from combustible materials and ensuring the fixture is not installed facing upwards to prevent water accumulation.

Installation

The installation requires appropriate anchors and screws, which are not included with the product. Ensure the mounting surface is stable and suitable for the fixture.

1. Drill the necessary holes for the mounting bracket.
2. Secure the bracket using appropriate anchors and screws.
3. Attach the floodlight to the bracket and adjust the angle as needed.

Wiring

The electrical connection must be performed by a qualified person. Ensure the power supply is disconnected before beginning any work.

• Line: Connect to the live wire.
• Ground: Connect to the ground wire.
• Neutral: Connect to the neutral wire.

Ensure all connections are secure and properly insulated.

Safety and maintenance

To ensure the longevity and safety of the device, follow these guidelines:

• Safety distance: Keep the fixture at least 0.5 meters away from any combustible material to avoid fire hazards.
• Cleaning: Disconnect the power source before cleaning. Use a clean, dry rag to wipe the fixture and its internal parts.
• Protection: Wear gloves when handling the fixture, as parts may become hot during operation.
• Orientation: Do not install the fixture facing upwards, as this can lead to water pooling and damage.

Technical specifications

• Voltage: 100V-240V ~ 50/60Hz
• Power: 10W
• Protection rating: IP66 (dust-tight and protected against powerful water jets)
• Impact protection: IK05