Lighting / Outdoor Landscape
User Manual for Tecnolite 100LQLEDY30MVN LED Floodlight
Quick guide for the Tecnolite 100LQLEDY30MVN LED floodlight. Includes installation steps, wiring instructions, safety precautions, and maintenance tips.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides essential installation and safety instructions for the Tecnolite 100LQLEDY30MVN and 100LQLEDY65MVN LED floodlights. Always disconnect the power supply before performing any installation or maintenance work. Ensure the fixture is installed at least 0.5 meters away from any combustible materials to prevent fire hazards.
Installation
The installation requires drilling and mounting the fixture to a suitable surface. Please note that anchors and screws are not included with the product. Ensure the fixture is mounted in an orientation that prevents water accumulation, as shown in the provided diagrams.
Wiring and Connection
The fixture must be connected to the power supply following the standard electrical configuration. The ground connection must be physical. Ensure the wires are connected as follows:
- Line: Connect to the live wire.
- Neutral: Connect to the neutral wire.
- Earth: Connect to the ground wire.
Verify all connections are secure before restoring power.
Maintenance
To maintain the performance and longevity of the floodlight:
- Disconnect the power supply before cleaning.
- Clean the fixture and its internal parts with a dry rag.
- Periodically check all electrical connections to ensure they remain secure.
- Do not use the fixture if it is damaged or if the wiring is exposed.
Technical Specifications
- Power: 100 W
- Voltage: 100 V - 240 V ~ 50/60 Hz
- Protection Rating: IP66 (Dust tight and protected against powerful water jets)
- Impact Protection: IK05
Manufacturer information
Tecnolite
Practical help
Common problems
Light does not turn on
Check the power supply and ensure all wiring connections (Line, Neutral, Earth) are secure and properly connected.
Risk of fire
Ensure the fixture is installed at least 0.5 meters away from any combustible materials.
Before use
- Disconnect the power supply before starting installation.
- Ensure you have appropriate anchors and screws (not included).
- Verify the mounting surface is suitable for the fixture weight.
- Check that the ground connection is physical.
- Ensure the installation orientation prevents water accumulation.
Images and diagrams
- The wiring diagram illustrates the correct connection for Line, Earth, and Neutral wires.
- The installation diagram shows the correct mounting orientation to prevent water from entering the fixture.
Model compatibility
- Not suitable for work with constant voltage on levels higher or lower than those indicated on the product label.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.