Lighting / Outdoor Landscape
User Manual for Tecnolite 150LQLEDY65MVN Outdoor LED Light
Quick guide for the Tecnolite 150LQLEDY65MVN outdoor LED light. Includes installation steps, wiring diagrams, safety precautions, and maintenance tips.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides essential installation and safety instructions for the Tecnolite 150LQLEDY65MVN outdoor LED light. Always ensure the power is disconnected before performing any installation or maintenance work.
Safety Information
To ensure safe operation and prevent fire hazards, please adhere to the following:
- Distance: The luminaire must be installed at a minimum distance of 0.50 meters from any combustible material.
- Heat: The lamp and parts of the luminaire become hot during operation. Do not touch the fixture while it is on or immediately after turning it off.
- Power: Ensure the power source is disconnected before starting any installation or maintenance.
Installation
Follow these steps to mount the fixture:
- Drill the necessary holes for mounting.
- Secure the fixture using appropriate anchors and screws (not included).
- Ensure the fixture is oriented correctly to prevent water ingress (refer to the orientation diagrams).
Wiring
The electrical connection requires connecting the Line, Ground, and Neutral wires to the power source. Ensure the ground connection is physical and secure.
Maintenance
To maintain the fixture:
- Clean the luminaire and its internal parts with a dry rag.
- Periodically check all electrical connections to ensure they remain secure.
Technical Specifications
- Voltage: 100-240V ~ 50/60Hz
- Power: 150W
- Current: 1.5A - 0.63A
- Lamp Type: LED 150W
Manufacturer information
Tecnolite
Practical help
Common problems
Fixture gets hot
This is normal during operation. Do not touch the fixture while it is on or immediately after turning it off.
Fire hazard
Ensure the fixture is installed at least 0.50m away from any combustible material.
Before use
- Ensure the power supply is disconnected.
- Verify the voltage matches 100-240V ~ 50/60Hz.
- Obtain appropriate anchors and screws for your mounting surface (not included).
- Check that the mounting location is at least 0.5m away from combustible materials.
Images and diagrams
- The manual provides diagrams indicating correct mounting angles to ensure the fixture is protected from rain.
- Wiring diagram illustrates the connection of Line, Ground, and Neutral wires.
Model compatibility
- Not suitable for use with constant voltage systems outside the specified range.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.