Health / Personal Care
Acurite 00665DIX Digital Instant Read Thermometer User Guide
Quick start guide for the Acurite 00665DIX digital thermometer, covering battery installation, temperature measurement procedures, stable reading alerts, and proper cleaning instructions.
Table of contents
Quick guide from the manual
The Acurite 00665DIX is a digital instant-read thermometer designed for food safety. This guide covers the essential steps for battery installation, operation, and maintenance to ensure accurate readings and device longevity.
Battery installation
The device requires one standard AAA alkaline battery (not included). Heavy-duty or rechargeable batteries are not recommended. To install: locate the slot on the edge of the back cover, gently pry it open, insert the battery, and replace the cover.
Operation
- Press the POWER button to turn the unit on.
- Use the °F/°C button to select your preferred temperature scale.
- Flip the probe open completely.
- Insert the probe into the thickest part of the meat or fowl near the end of the cooking time. Ensure the tip does not touch bone, gristle, the pan, or hollow cavities.
- Wait 5-10 seconds for the numbers to stop moving to obtain an accurate reading.
Stable temperature alerts
The thermometer will beep when a stable temperature is detected based on the following conditions: the temperature must be rising at a rate of at least +3.3°C in 3 seconds, the temperature must be above 48.8°C, and the reading must remain stable within 1.1°C for 2 seconds. The beep resets automatically after the temperature drops 8.3°C from the high mark.
Cleaning and maintenance
Wash the probe with hot, soapy water after each use to prevent cross-contamination. The housing and display area are NOT waterproof. Do not submerge the unit in water or place it in a dishwasher. Wipe the housing with a soft, damp cloth, using a very small amount of dish soap if degreasing is necessary.
Auto-off feature
To conserve battery life, the thermometer will automatically turn off after one hour of inactivity.
Manufacturer information
AcuRite
Practical help
Common problems
Thermometer does not beep
The beep only sounds when the temperature is above 48.8°C and meets specific stability criteria.
Inaccurate temperature reading
Ensure the probe tip is not touching bone, gristle, or the pan, and that it is inserted into the thickest part of the meat.
Before use
- Install one AAA alkaline battery
- Ensure the probe is fully flipped open
- Select the desired temperature scale (°F or °C)
Specs in practice
- Water resistance
- The housing and display are NOT waterproof; do not submerge or use in a dishwasher.
Model compatibility
- Use only standard alkaline AAA batteries; do not use heavy-duty or rechargeable types.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.