Toys / RC Models & Drones
User Manual for Creative 1165A-SB Off Road Car
Quick guide for the Creative 1165A-SB Off Road Car. Learn how to install batteries, operate the remote control, charge the vehicle, and perform maintenance for optimal performance.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This guide provides essential instructions for operating the Creative 1165A-SB Off Road Car. Ensure the vehicle is fully charged before use and that you have the correct batteries for the remote controller. The car is suitable for ages 6 and up.
Battery Installation
For the Car:
- Use a crosshead screwdriver to open the battery cover.
- Insert the included 3.7V rechargeable battery into the compartment.
- Secure the cover back in place.
For the Remote Controller:
- Open the battery compartment.
- Insert 2 x 1.5V AA batteries (not included).
- Ensure correct polarity as indicated in the compartment.
Operation
Getting Started:
- Turn the switches on both the car and the controller to the "ON" position.
- If the car loses performance or function, it is time to recharge the battery.
Driving Controls:
- Forward: Push both rockers on the remote control upward.
- Backward: Pull both rockers on the remote control downward.
- Spinning: Push the left rocker upward and the right rocker downward to spin right; push the left rocker downward and the right rocker upward to spin left.
- Advanced Maneuvers: Refer to the diagrams for specific rocker combinations to perform flips and spins.
Battery Safety
- Do not short-circuit terminals.
- Do not recharge non-rechargeable batteries.
- Rechargeable batteries must be charged under adult supervision.
- Do not mix different types of batteries or new and used batteries.
- Dispose of batteries safely; do not dispose of in fire as they may explode.
- Remove batteries from the toy if it is not being used for a long period.
Care and Maintenance
- Wipe the toy gently with a clean, damp cloth.
- Keep the toy away from direct sunlight and excessive heat.
- Ensure the battery is charged fully at once when power is low.
Troubleshooting and Tips
- Flipping function failure: Ensure the battery has sufficient power. Do not operate on smooth ground, as this may cause the flipping function to fail.
- Charging: The estimated charging time for the rechargeable battery is 3-4 hours.
Manufacturer information
Guangdong Creative Double Star Technology Co., Ltd.
Practical help
Common problems
Car loses performance or function
The battery is likely low; recharge the battery for 3-4 hours.
Flipping function is not working
Ensure the battery is fully charged and do not operate the car on smooth ground.
Before use
- Install the 3.7V rechargeable battery in the car using a crosshead screwdriver.
- Install 2 x 1.5V AA batteries in the remote controller.
- Ensure both the car and controller switches are set to the 'ON' position.
- Check that battery terminals are clean and not short-circuited.
Specs in practice
- Charging Time
- 3-4 hours for the 3.7V rechargeable battery.
- Controller Batteries
- Requires 2 x 1.5V AA batteries (not included).
Images and diagrams
- Pictures 1-4 illustrate basic movement: pushing rockers forward/backward moves the car accordingly.
- Pictures 5-9 demonstrate advanced maneuvers, including spinning and flipping, by manipulating the rockers in opposite directions.
Model compatibility
- Do not operate on smooth ground for the flipping function.
- Only use the provided rechargeable battery for the car.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.