findmanualpdf.com

Falcon Ridge Arctic Cat Wildcat Trail & Sport Soft Rear Window Installation Guide

Quick installation and care guide for the Falcon Ridge Soft Rear Window for Arctic Cat Wildcat Trail and Sport models. Includes mounting steps, cleaning tips, and storage instructions.

Table of contents

Manual images

Jump to the section

Quick guide from the manual

This document provides installation and maintenance instructions for the Falcon Ridge Soft Rear Window designed for Arctic Cat Wildcat Trail and Sport vehicles. For optimal results, perform the installation in temperatures of 70 degrees F or warmer to ensure the adhesive Velcro bonds correctly. If necessary, store the adhesive strips at room temperature before installation.

Installation

Applying adhesive hook pieces to the roll cage
Applying adhesive hook pieces to the roll cage
Securing the enclosure to the roll cage
Securing the enclosure to the roll cage
  1. Open the carton and lay the enclosure on a clean, flat surface.
  2. Verify all parts are present: 6 pieces of 3-inch adhesive hook strips, 2 pieces of 18-inch adhesive strips, and 1 piece of 44-inch adhesive Velcro strip. If parts are missing, contact customer service at 606-845-7439.
  3. Secure the top of the rear window using the double-sided strips. Apply a 3-inch adhesive hook piece to the inside of the roll cage at each strip location.
  4. Place the 18-inch adhesive strips along the sides of the roll cage facing the rear of the vehicle and attach the sides of the rear window to the Velcro.
  5. Attach the bottom of the window to the vehicle using the 42-inch adhesive Velcro strip.

Cleaning and Storage

To maintain the enclosure and prevent scratching the window panels:

  • Clean only with a soft rag or sponge using a mild liquid detergent and warm water. Never use a dry cloth or rag.
  • Allow the cab to dry completely before storage.
  • Always roll the cab for storage instead of folding it, as folding will damage the windows.
  • Roll the cab to a diameter of approximately 8 inches and store in the original carton at room temperature. Avoid extreme heat or cold.

Safety and Warranty

Do not smoke inside the cab or expose the enclosure to direct flames, as the material is flammable. The product includes a 30-day warranty for defects and a 1-year warranty covering material or workmanship issues. For returns, the product must be in unused, factory-new condition and returned within 30 days with a return authorization number.

Practical help

Common problems

Adhesive Velcro not sticking properly

Ensure installation is performed in temperatures of 70 degrees F or warmer. If cold, store adhesive strips at room temperature before applying.

Windows scratched during cleaning

Never rub windows with a dry cloth. Use a soft rag or sponge with mild liquid detergent and warm water.

Windows damaged during storage

Do not fold the cab. Roll it up to a diameter of approximately 8 inches.

Before use

  • Verify all parts: 6x 3-inch strips, 2x 18-inch strips, 1x 44-inch strip.
  • Ensure the installation area is clean and free of dirt.
  • Check that the ambient temperature is at least 70 degrees F.
  • Inspect all parts for damage before beginning installation.

Specs in practice

Adhesive Velcro
Used to secure the enclosure to the roll cage and vehicle body.
Roll diameter
Recommended 8-inch diameter for proper storage to prevent window damage.

Images and diagrams

  • The diagrams illustrate the application of double-sided Velcro and 3-inch adhesive hook pieces to the roll cage to secure the enclosure top and sides.

Model compatibility

  • Compatible with Arctic Cat Wildcat Trail and Sport models (AC-TRAIL-RW01 / AC-SPORT-RW01).

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.