Automotive / Bicycle Carriers
Fiamma Carry-Bike CL Motorhome Bicycle Carrier Installation and Usage Guide
A comprehensive guide for the Fiamma Carry-Bike CL motorhome bicycle carrier. Includes installation steps, safety warnings, weight distribution guidelines, and maintenance procedures.
Table of contents
Quick guide from the manual
This document provides installation and usage instructions for the Fiamma Carry-Bike CL motorhome bicycle carrier. Always ensure the vehicle wall or door is sufficiently solid to support the carrier before installation. If in doubt, consult a professional.
Safety instructions
- Weight Limits: Do not exceed the maximum load of 50 kg.
- Weight Distribution: Distribute weight evenly. Place the heaviest bicycles closest to the vehicle wall for better stability.
- Driving: Always be aware of the carrier's presence, especially when reversing. Use additional rear-view mirrors if rear visibility is limited.
- Compliance: Adhere to local traffic laws and speed limits.
Installation
Before starting, verify that all parts are present and undamaged. The installation requires drilling holes (Ø 6.5 mm) into the vehicle wall.
- Identify the strongest points on the vehicle wall for bracket placement.
- Mount the brackets securely.
- Assemble the frame components as shown in the exploded view.
- Important: When attaching the fork to the tube, do not fully tighten. Leave a 2mm space.
Maintenance
Regular maintenance is essential for safety:
- Check the tightness of all fasteners, especially after the first few kilometers and before/after long trips.
- Inspect rubber parts under brackets and straps for signs of wear or porosity. Replace immediately if damaged.
- Rotate bicycle handlebars to prevent damage to the vehicle wall.
Manufacturer information
Fiamma SpA
Practical help
Common problems
Damaged during transport
Check all parts upon arrival. If damaged, contact your dealer.
Wall strength concerns
Ensure the vehicle wall or door is sufficiently solid. Reinforce if necessary before installation.
Limited rear visibility
Use additional rear-view mirrors.
Before use
- Verify all parts are present and undamaged.
- Check vehicle wall/door strength for mounting points.
- Ensure compatibility with the vehicle.
- Check fasteners and straps before and after long trips.
- Rotate bicycle handlebars to avoid vehicle wall damage.
Model compatibility
- Requires a solid wall or door for mounting.
- Check axle load distribution after installation.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.