Lighting / Fixtures
Installation Guide for Hinkley 1141OL-CL Casa Large Post Top Lantern
Comprehensive installation and wiring instructions for the Hinkley 1141OL-CL Casa Large Post Top or Pier Mount Lantern, including post mounting and electrical connection procedures.
Table of contents
Manual images
Jump to the sectionProduct Overview
The Hinkley 1141OL-CL Casa Large Post Top or Pier Mount Lantern is an outdoor lighting fixture designed for post-top installation. This document provides detailed instructions for both the physical mounting of the fixture body to a post and the necessary electrical wiring procedures.
Safety Information
Warning: Always turn off the power supply before beginning any installation work. If you are unfamiliar with electrical wiring, consult a qualified electrician or local authorities to ensure compliance with building codes. Ensure all wire connectors used for outdoor electrical connections are silicone-filled to maintain a watertight seal.
Installation Procedure
The installation process is divided into two main parts: mounting the fixture body to the post and assembling the glass components.
Post Mounting
- Drill three pilot holes in the installed post to secure the fixture body.
- Slide the post fitter of the fixture body over the post and use the holes in the side of the fitter to mark the exact mounting locations.
- Remove the fixture body and drill 5/32" (4mm) diameter holes at the marked spots.
- Secure the fixture body to the post using the provided sheet metal screws.
Glass Assembly
It is recommended to install the fixture body on the post before adding the glass. To install the glass:
- Remove the top loop and spacer from the center stem.
- Slide the roof and scroll assembly off the center stem.
- Insert the glass into the fixture, ensuring the small hole at the top of the glass is positioned correctly at the top of the fixture.
- Replace the roof and scroll assembly, aligning the pins at the bottom of the scrolls with the holes in the top of the uprights.
- Reinstall the spacer and thread the top loop back onto the center stem to complete the assembly.
Wiring Instructions
For outdoor fixtures, connect the positive supply wire (typically black or smooth) to the positive fixture lead and the negative supply wire (typically white or ribbed) to the negative fixture lead using appropriately sized twist-on connectors. Ensure all connections are protected with silicone sealant. Connect the fixture ground wire to the power supply ground wire inside the post.
Manufacturer information
Hinkley Lighting
Practical help
Common problems
Water entering the electrical box
Ensure all wire connectors are silicone-filled and use caulk to seal any gaps between the mounting plate and the wall or post.
Difficulty aligning glass assembly
Ensure the pins at the bottom of the scroll assembly are properly aligned with the holes in the top of the uprights before tightening the top loop.
Before use
- Ensure power supply is turned off at the circuit breaker.
- Verify you have a 5/32" (4mm) drill bit for pilot holes.
- Confirm the post is securely installed.
- Check that all necessary electrical tools and silicone sealant are available.
- Ensure the fixture body is oriented in the desired position before marking holes.
Specs in practice
- Pilot hole size
- 5/32 inch (4mm) diameter holes are required for mounting the fixture to the post.
- Wire connectors
- Must be silicone-filled to prevent moisture ingress in outdoor environments.
Images and diagrams
- Drawing 1 (Mounting): Shows the post fitter and the location of the three mounting holes.
- Drawing 3 (Post-Mount): Illustrates the correct wiring connection for post-mounted fixtures, including the ground wire connection.
Model compatibility
- Designed for post-top or pier mount applications.
- Requires a 3-wire electrical system for proper grounding.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.