Electronics / RFID Barcode Scanners
Accessories Guide for Honeywell Voyager 1470G and 1472G
A comprehensive accessories guide for the Honeywell Voyager 1470G and 1472G scanners. Find compatible batteries, chargers, communication bases, power supplies, cables, and stands to optimize your scanning setup.
Table of contents
Manual images
Click an image to enlargeQuick Guide to Accessories
This document serves as an official accessories reference guide for the Honeywell Voyager 1470G and 1472G scanners. It provides part numbers and descriptions for compatible hardware, including batteries, charging bases, power supplies, cables, and mounting stands. Use this guide to ensure you select the correct components for your specific regional and interface requirements.
Batteries and Battery Chargers
The following components are available for wireless scanner power management:
- Battery Pack (BAT-SCN01A): Lithium-ion battery designed for Voyager 1202g and 1472g wireless scanners.
- 4-Bay Battery Charger (MB4-BAT-SCN01XXD06): Desktop mount charger for Granit, Xenon, and Voyager lithium-ion batteries. Includes desktop power supply and mounting screws.
- 4-Bay Battery Charger (MB4-BAT-SCN01XXW06): Wall mount charger for Granit, Xenon, and Voyager lithium-ion batteries. Includes wall mount power supply and mounting screws.
Access Points and Communication Bases
These devices facilitate connectivity and charging for the scanners:
- Bluetooth Access Points (AP-100BT-07N / AP-010BT-07N): Available in Class 1 (100m range) and Class 2 (10m range) versions. Supports RS232, USB, KBW, and IBM host interfaces.
- Voyager Charge and Communication Base (CCB01-010BT-V1N): Supports Bluetooth communication and charging for one scanner.
- Charge Only Base (COB01): Dedicated base for charging a single scanner. Power supply must be purchased separately.
Power Supplies
Various regional power supplies are available for cabled connections and charging bases. All listed models (e.g., 46-00526, 46-00528) provide 1.0A at 5.2V DC and support 90-255V AC at 50-60Hz. Available plug types include:
- North America (NA)
- European Union (EU)
- Australia (AU)
- China (CN)
- India (IN)
- United Kingdom (Type G)
Cables and Stands
A wide range of cables is available to connect the scanner to the host system, including RS232, USB (Type A, Type C, and 12-locking type), and KBW (PS2) options. Mounting accessories include:
- Voyager XP 1470g Stand (STND-15F03-009-6): 15cm height, flexible rod, medium oval weighted base.
- Voyager XP 1470g Stand (Rigid) (STND-15R00-009-6): 6-inch rigid cradle.
- Voyager Holder (HOLDER-009-U): Desk or wall holder for Voyager 1250g and 1470g.
Manufacturer information
Honeywell International Inc.
Practical help
Common problems
Incompatible power supply
Ensure the power supply plug type matches your regional wall outlet (NA, EU, AU, CN, IN, or UK).
Interface mismatch
Verify that the selected cable (RS232, USB, or KBW) matches the host interface requirements of your computer or POS system.
Before use
- Verify the scanner model is either Voyager 1470G or 1472G.
- Identify the required host interface (USB, RS232, or KBW).
- Select the correct regional power supply plug.
- Confirm if a communication base or a direct cable connection is required.
Specs in practice
- RS232/USB/KBW
- Supported host interface types for cables and communication bases.
Images and diagrams
- Wiring diagrams illustrate the connection path from the power supply to the wall outlet and from the scanner base to the host computer system.
Model compatibility
- Battery pack BAT-SCN01A is compatible with Voyager 1202g and 1472g.
- Voyager Holder (HOLDER-009-U) is compatible with Voyager 1250g and 1470g.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.