Plumbing / Sinks Faucets
Automatic Washbasin Tap Sanela SLU 02T User Guide
Quick guide for the Sanela SLU 02T automatic washbasin tap. Learn about technical specifications, sensor settings, Bluetooth control, and installation requirements.
Table of contents
Quick guide from the manual
The Sanela SLU 02T is an automatic washbasin tap equipped with a thermostatic valve for temperature control and Bluetooth connectivity. It requires a 24V DC power supply for operation. Key features include a hygienic flush, adjustable sensor range, and a safety shut-off function. Configuration can be performed via the Sanela Control app or the SLD 03 remote control.
Product Description
The tap is designed for supplying hot and cold water, with manual temperature adjustment between 35 and 65 °C. It activates water flow upon detecting hands in the sensing zone and stops flow after hands are removed and a set time elapses. It includes an economical aerator with a flow rate of 6 l/min.
Technical Specifications
- Supply voltage: 24 V DC
- Power input: 7 W
- Dimensions: 158 x 136 mm
- Weight: 1.82 kg
- Water inlet: External thread G 1/2"
- Recommended working pressure: 0.1 - 0.6 MPa
- Flow rate: 6 l/min
- Active range (standard): 0.13 - 0.19 m
- Active range (START/STOP mode): 0.05 - 0.15 m
Operation and Settings
The device features a safety function that automatically shuts off water after 5 minutes of continuous flow. The sensor range and other parameters can be adjusted using the Sanela Control app (available on App Store and Google Play) via Bluetooth or by using the optional SLD 03 remote control. The tap can also be switched to a START/STOP mode.
Dimensions
The tap has a projection of 158 mm and a height of 136 mm. Ensure sufficient clearance for installation and maintenance.
Recommended Accessories
The tap requires a compatible 24V DC power supply. Available options include:
- SLZ 01Y / 01Z: Power supply for up to 5 or 9 taps.
- SLZ 04Y / 04Z / 04X: DIN rail power supplies for 5, 9, or 15 taps.
- SLZ 06: Power supply for 1 tap.
- SLD 03: Remote control for parameter adjustment.
Manufacturer information
SANELA spol. s r. o.
Practical help
Common problems
Water does not flow when hands are in the sensing zone.
Check if the 24V DC power supply is connected and active. Verify that the sensor is not obstructed.
Need to change sensor range or operating mode.
Use the Sanela Control app via Bluetooth or the SLD 03 remote control to adjust parameters.
Water temperature is not correct.
Adjust the temperature manually using the thermostatic valve located on the unit (range 35 - 65 °C).
Before use
- Ensure a 24V DC power supply is available and compatible with the number of taps installed.
- Verify that the water pressure is within the recommended range of 0.1 - 0.6 MPa.
- Download the Sanela Control app to your smartphone for initial configuration.
- Check that the installation area accommodates the 158 x 136 mm dimensions.
Specs in practice
- Supply voltage 24V DC
- The unit requires a specific 24V DC power source; it cannot be connected directly to mains AC voltage.
- Active range
- The distance at which the sensor detects hands. It varies between standard mode (0.13-0.19m) and START/STOP mode (0.05-0.15m).
- Safety function
- The water will automatically shut off after 5 minutes to prevent flooding or waste.
Images and diagrams
- The dimension drawing illustrates the height (136 mm) and the spout projection (158 mm) to assist with installation planning.
Model compatibility
- Requires Sanela power supply units (e.g., SLZ 01Y, SLZ 06) for operation.
- Compatible with SLD 03 remote control for advanced settings.
- Sanela Control app is required for Bluetooth configuration.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.