Lighting / Fixtures
User Manual for Tecnolite 180CTL8361MVCH Aurora Crystal Pendant Lamp
Quick guide for the Tecnolite 180CTL8361MVCH Aurora Crystal Pendant Lamp. Includes installation steps, technical specifications, safety warnings, and maintenance instructions.
Table of contents
Quick guide from the manual
This document provides installation and safety instructions for the Tecnolite 180CTL8361MVCH Aurora Crystal Pendant Lamp. The luminaire is designed for indoor use. Ensure all electrical power is disconnected before beginning installation. The lamp must be installed at a minimum distance of 0.50 meters from any combustible material.
Technical Specifications
- Voltage: 100V-240V, 50/60Hz
- Power: 25.5W (8.5W x 3 LED)
- Lamp Base: E27
- Usage: Indoor
Installation
- Assembly: Attach the lamp structure components as shown in the diagram.
- Mounting: Use the provided bracket (A-01) to mount the fixture to the ceiling. Use the anchors (A-03) and screws (A-02) as required.
- Wiring: Connect the electrical wires (Line, Neutral, Ground) using the provided connector (A-06). Ensure the ground connection is physical.
- Finalization: Secure the canopy to the mounting bracket and install the bulbs.
Safety and Maintenance
Safety: The luminaire and its parts may become hot during operation. Use a dry rag and gloves when handling the unit to prevent burns. Ensure the ground connection is physical.
Maintenance: Disconnect the power source before performing any maintenance. Clean the luminaire and its internal parts with a dry rag and check the connections periodically.
Warranty
The warranty covers defects in materials or components for the following periods:
- LED lamps: 5 years
- Self-ballasted compact fluorescent lamps: 2 years
- Smart devices, such as lamps, light fixtures, sensors: 1 year
For warranty claims, contact the distributor where the product was purchased or the customer service centers listed in the manual.
Manufacturer information
Tecnolite
Practical help
Common problems
Lamp components become hot
Use a dry rag and gloves to handle the luminaire to avoid burns.
Safety distance violation
Ensure the luminaire is located at least 0.50 meters away from any combustible material.
Electrical connection issues
Ensure the ground connection is physical and check all connections periodically.
Before use
- Disconnect the power source before installation
- Verify the voltage is between 100V-240V
- Ensure a minimum distance of 0.50m from combustible materials
- Use gloves during installation
- Verify physical ground connection
Images and diagrams
- Step 1: Assembly of the lamp structure
- Step 2: Mounting the bracket to the ceiling
- Step 3: Wiring connections
- Step 4: Final assembly and bulb installation
Model compatibility
- Designed for indoor use only
- Not suitable for constant voltage outside specified range
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.