Lighting / Fixtures
Tecnolite 180CTL8362MVCH Indoor Light
Quick installation guide and safety instructions for the Tecnolite 180CTL8362MVCH indoor pendant light. Learn how to mount the fixture, connect the wiring, and maintain your lighting safely.
Table of contents
Quick guide from the manual
This document provides installation and safety instructions for the Tecnolite 180CTL8362MVCH indoor light fixture. Key requirements include a physical ground connection and maintaining a minimum distance of 0.5 meters from combustible materials. Always disconnect the power supply before performing any installation or maintenance work.
Installation
- Assemble the fixture components as shown in the diagram.
- Prepare the ceiling surface by drilling holes and inserting anchors (A-03). Secure the mounting bracket (A-01) using screws (A-02).
- Connect the electrical wires. Ensure the ground wire is physically connected. Use the provided connector (A-06) to secure the Line, Neutral, and Ground wires.
- Attach the fixture base to the mounting bracket and secure it with the provided nuts.
- Install the light bulbs (E27 base) into the sockets.
Technical Specifications
- Voltage: 100 V - 240 V, 50/60 Hz
- Power: 25.5 W
- Base: E27
Safety and Maintenance
Always disconnect the power supply before performing any installation or maintenance work. Clean the fixture and its internal parts with a dry rag. Do not use the fixture with voltages outside the specified range. Ensure the fixture is kept at least 0.5 meters away from any combustible material to avoid fire hazards.
Manufacturer information
Tecnolite
Practical help
Common problems
Electrical connection issues
Verify that the ground wire is physically connected and all wires are securely fastened with the provided connector.
Fixture overheating
Ensure the fixture is not covered and is kept at least 0.5 meters away from combustible materials.
Before use
- Verify power supply is 100-240V
- Ensure installation area is at least 0.5m away from combustible materials
- Gather tools: drill, screwdriver, protective gloves
- Turn off main power supply before starting
Images and diagrams
- Step 1: Assembly of the pendant components.
- Step 2: Mounting bracket installation using anchors and screws.
- Step 3: Wiring diagram showing Line, Neutral, and Ground connections.
- Step 4: Securing the fixture base to the ceiling.
- Step 5: Final bulb installation.
Model compatibility
- Requires E27 base bulbs.
- Designed for indoor use only.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.