Tools / Pressure Washers
User Manual for Total 20V Battery Brush Cutter TSTLI20018
Comprehensive user guide for the Total 20V Battery Brush Cutter TSTLI20018. Includes safety instructions, assembly steps, operation, maintenance, and technical specifications.
Quick answers from the manual
Quick answer
- The Total TSTLI20018 is a battery-powered brush cutter. It requires a 40V battery, uses a bump-and-go nylon head, and must be operated with a shoulder harness and full protective gear. p. 1, 9
Key actions
- Install battery p. 10
- Install guard p. 11
- Install cutting head p. 12
First start
- Ensure the area is clear (15m radius), wear full PPE, attach harness, and check that the switch is off before inserting the battery. p. 4, 12
Problems and fixes
Nylon cord not feeding
Tap the trimmer head against the ground while rotating.
p. 14Maintenance and reset
- Always remove the battery before cleaning or maintenance. Never use gasoline or solvents. p. 14
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Voltage | 40V | Operating voltage | p. 9 |
| Max Speed | 6,500/min | No load speed level 2 | p. 9 |
Where to find it in the PDF
- Safety instructions p. 2, 3, 8
- Commissioning and operation p. 4, 10, 11, 12
- Maintenance p. 14, 15
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Total TSTLI20018 is a battery-powered brush cutter designed for cutting grass and light weeds. Before operation, ensure the work area is clear of people and animals within a 15-meter radius. Always wear appropriate personal protective equipment (PPE) including a helmet, safety glasses, ear protection, gloves, and sturdy footwear. Ensure the guard is properly installed and the nylon cutting head is in good condition before starting.
Safety instructions
General Safety: Never allow children or untrained individuals to use the machine. Keep fingers away from the switch trigger when not in use. Do not force the tool; use it only for its intended purpose of cutting grass and light weeds.
Electrical and Battery Safety: Do not use the tool in damp or wet locations. Remove the battery pack before making adjustments, changing accessories, or storing the tool. Do not expose the battery to fire or temperatures above 130°C. Charge only with the manufacturer-specified charger.
Commissioning and operation
Battery Installation: Slide the battery cartridge into the tool until it clicks into place. Ensure the red indicator is not visible. To remove, slide the button on the front of the cartridge while pulling it out.
Guard and Cutting Head: Always use the tool with the guard installed. Attach the guard to the bracket using the provided screws. To install the cutting head, insert a hex key through the hole in the tool head to lock the shaft, then screw the nylon head onto the spindle.
Operation: Always wear the shoulder harness and adjust it for a comfortable fit. Hold the tool with both hands. The nylon head features a bump-and-go mechanism; tap the head against the ground while it is rotating to feed the line.
Maintenance and cleaning
Always remove the battery before performing any maintenance. Check the condition of the nylon cutting head and protection devices before each use. Keep the handlebar clean and free of oil and grease. Never use gasoline, thinner, or alcohol for cleaning. If the nylon cord no longer feeds, replace it following the specific instructions for your trimmer head type.
Technical data
The tool operates at 40V (as per technical data sheet). It features two speed settings: 5,000/min (level 1) and 6,500/min (level 2). The cutting diameter is 255mm, and the cutout diameter is 330mm.
Practical help
Common problems
Tool does not start
Ensure the battery is fully inserted and the switch is in the off position before starting. Check if the battery is charged.
Nylon cord does not feed
Tap the trimmer head against the ground while the tool is running. If it still fails, check for tangles or replace the cord.
Excessive vibration
Stop the tool immediately, remove the battery, and inspect the cutting head for damage or loose parts.
Before use
- Ensure no children or animals are within a 15-meter radius.
- Wear full PPE: helmet, safety glasses, ear protection, gloves, and sturdy shoes.
- Verify the guard is securely attached.
- Check the nylon cutting head for cracks or damage.
- Ensure the battery is fully charged and properly installed.
- Check that the switch is in the off position.
Specs in practice
- No load speed
- Rotation speed of the cutting head: 5,000/min (level 1) or 6,500/min (level 2).
- Cutting diameter
- The effective cutting width of the nylon head: 255mm.
Images and diagrams
- Exploded view: Shows the assembly of the handle, motor, and cutting head components.
- Safety symbols: Indicate mandatory PPE and safety distances.
Model compatibility
- Use only original Total nylon trimmer heads.
- Use only manufacturer-approved batteries.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.