findmanualpdf.com

User Manual for Traceable 1034CC Dual-Display Digital Stopwatch

Quick guide for the Traceable 1034CC Dual-Display Digital Stopwatch. Learn how to use the countdown timer, stopwatch modes, memory functions, and battery replacement.

Table of contents

Quick guide from the manual

The Traceable 1034CC is a dual-display digital stopwatch featuring a countdown timer, stopwatch mode, and memory function for up to 8 split/lap times. Before first use, ensure the battery (CR 2032) is installed and the display is reset to zero.

Countdown Timer Mode

The maximum setting time is 9 hours, 59 minutes, and 59 seconds. If started from zero, the counting time is 10 hours.

  • Enter Setting Mode: Hold button "C" for 2 seconds.
  • Select Digits: Press "B" to select the digits to adjust (they will flash).
  • Adjust Digits: Press "A" to set the flashing digits. Hold "A" for over 2 seconds to advance digits quickly.
  • Finish: Press "C" to complete the adjustment.
  • Operation: Press "A" to Start/Stop. Press "B" to reload the timer to the set value when stopped.

Stopwatch Mode

Press "D" to enter Stopwatch mode (the "STW" icon will appear). The stopwatch measures up to 10 hours.

  • Start/Stop: Press "A".
  • Reset: When the stopwatch is stopped, press "B" to reset digits to 0:00'00"0.
  • Split/Lap Time: The device tracks elapsed time for specific sections or distances.

Memory Function

The stopwatch automatically stores the first 8 split/lap times and the total elapsed time. It also identifies the fastest and slowest laps.

  • Recall Data: Press "C" to recall stored times. Keep the button pressed to scroll through data successively.
  • Stop Recall: Press "A", "B", or "D".
  • Note: When memory is full, the "split/lap number" will flash. Extra times will not be stored, but the counter will continue to track them.

Maintenance and Troubleshooting

Resetting the Device: If you encounter irregular segments or malfunctions, hold down all 4 buttons simultaneously to reset the stopwatch.

Battery Replacement: The battery life indicator in the upper left corner of the display will turn on when the battery needs replacement. Use a CR 2032 lithium battery or equivalent.

Service and Contact

For warranty, service, or recalibration, contact Traceable Products at 12554 Galveston Rd. Suite B230, Webster, Texas 77598 USA. Phone: 281 482-1714, Fax: 281 482-9448, Email: [email protected], Website: www.traceable.com.

Practical help

Common problems

Irregular display segments or device malfunction

Hold down all 4 buttons simultaneously to perform a hard reset.

Memory is full

The "split/lap number" will flash. The device will stop storing new times, though the counter will continue to function.

Before use

  • Check the battery life indicator in the upper left corner.
  • Ensure the stopwatch is reset to 0:00'00"0 before starting a new measurement.
  • Verify the correct mode (Timer vs. Stopwatch) is selected using button D.

Specs in practice

Countdown Timer
Maximum setting time is 9 hours, 59 minutes, and 59 seconds.
Stopwatch Capacity
Measures up to 10 hours in hours, minutes, seconds, and 1/100 seconds.
Memory Capacity
Stores up to the first 8 split/lap times and total elapsed time.

Model compatibility

  • Uses CR 2032 lithium battery or equivalent.
  • ISO 9001:2018 Quality Certified and ISO/IEC 17025:2017 accredited.

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.