Lighting / Controllers & Dimmers
User Manual for Ultralux SSWFSC LED Dimmer
Quick guide for the Ultralux SSWFSC 2.4G RF TUYA LED dimmer. Includes wiring instructions, technical specifications, safety warnings, and remote control compatibility.
Quick answers from the manual
Quick answer
- The SSWFSC is a 2.4G RF TUYA dimmer for single-colour LED strips. It requires a 12-24V DC power supply and supports control via compatible Ultralux RF remotes and the TUYA smartphone app. p. 1
Key actions
- Installation p. 1
Problems and fixes
Power supply connection
Ensure 12-24V DC supply is used and wires are connected according to the wiring diagram.
p. 1Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Input/Output Voltage | 12-24 V DC | Operating voltage range | p. 1 |
| Max Output Power | 192 W (12 V DC); 384 W (24 V DC) | Maximum load capacity | p. 1 |
Where to find it in the PDF
- Product Manual p. 1
Table of contents
Quick guide from the manual
The Ultralux SSWFSC is a 2.4G RF TUYA dimmer designed for single-colour LED strips. It supports control via compatible RF remotes and the TUYA smartphone application. Before installation, ensure the power supply is switched off at the main switch. The device requires a 12-24V DC power supply and must be installed on non-flammable surfaces with adequate space for heat dissipation.
Description
This smart light control system allows for separate control of up to 4 zones or overall zone control. It is compatible with all single-colour LED strips from the UltraLux series.
Technical Details
- Input/Output Voltage: 12-24 V DC
- Maximum Output Current: 4x4 A (simultaneous control)
- Maximum Output Power: 192 W (12 V DC); 384 W (24 V DC)
- IP Rating: IP20
- Remote Distance: Max 20 m in open area
- Working Temperature: -10°C to +40°C
- Warranty: 2 years
Safety Instructions
- Performing any activity with the power supply on constitutes a potential hazard of electric shock. Always switch off the power at the main switch before mounting or replacement.
- The dimmer must be connected to a properly functioning electrical system in compliance with applicable standards.
- Installation must be performed by a person with appropriate authorization.
- Do not install on flammable surfaces.
- Do not cover the power supply; provide enough space for heat dissipation.
- Supply voltage must be 12-24 V DC; never connect to other voltages.
Wiring Diagram
The dimmer must be connected to a 12-24V DC power supply. The load capacity depends on the LED strip. Please refer to the provided wiring diagram to ensure wires are correctly connected to the input and output terminals.
Working Information
The dimmer features a power-lost memory function, meaning it will remember the last working mode after a power interruption. It can be controlled by the following RF remotes from the series: SSG1Z, SSW1Z, SSRF1Z, SSR1Z, SSW4Z, and SSR4Z. Each remote control has its own manual operation instruction for pairing.
Environmental Care
The product and its components are not harmful to the environment. Please dispose of package elements separately in containers for the corresponding material. Dispose of broken products separately in containers for electrical equipment.
Practical help
Common problems
Dimmer not functioning
Verify that the power supply is 12-24V DC and that all wires are connected according to the wiring diagram.
Remote control not working
Ensure the remote is paired correctly according to the specific remote's manual. Check if the remote is within the 20m range.
Before use
- Switch off the power supply at the main switch.
- Verify the power supply voltage is 12-24V DC.
- Ensure the installation surface is non-flammable.
- Check that the LED strip load is compatible with the dimmer's output capacity.
- Ensure there is enough space for heat dissipation.
Specs in practice
- Input/Output Voltage
- Must be 12-24V DC. Do not connect to other voltages.
- Max Output Power
- 192W at 12V DC or 384W at 24V DC. Do not exceed these limits.
- Remote Distance
- Maximum 20 meters in an open area.
Images and diagrams
- The wiring diagram illustrates the 12-24V DC input connection on the left.
- The right side shows the output terminals for connecting up to 4 single-colour LED strips.
Model compatibility
- Compatible with Ultralux RF remotes: SSG1Z, SSW1Z, SSRF1Z, SSR1Z, SSW4Z, SSR4Z.
- Supports control via the TUYA smartphone application.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.